SLIPCOVER INSTRUCTIONS

	Unfold and unzip the slipcover
	Pull it down over the top of the furniture
	Zipper is located on the outside back corner
	Lay the slipcover over the entire frame
	Begin putting slipcover on the opposite arm of the zipper
	Cover each arm before zipping up the slipcover
	Notice extra fabric in the seat area and where the inside arm meets that inside back of frame
	Tuck in the extra fabric to achieve a proper fitting slipcover and to ensure that the slipcover does not move or slip while on the furniture

SLIPCOVERS WITH A SKIRT

	For slipcovers with a skirt, there is a separate piece of fabric sewn on the slipcover behind the skirt (tacking strip)
	Use tacking strip to help secure the slipcover to the frame and minimize any slippage that might occur
	Insert twist pins or straight pins directly through the tacking strip into the upholstery
	Work the cover down from side to side until the cushion is completely covered
	Gently work in all corners and then gradually close the zipper
	For back or loose cushions, fold the cushion in half before stuffing into slipcover
	Work the corners of cushions into the corners of slipcovers and close the zipper